Konica Minolta 0902, Service Manual

Page: 268 / 302

Chapter 6 Adjustment
6-16
3
Select "14 x 17 inch" for the "Cassette Type".
4
Click the [Initialization] button for the [Adjustment
of Pressing Amout].
5
Set the standard cassette facing toward the
magnet (push plate) on the receiver.
6
Click the [Move To HP] button.
7
Click the [Pressing Position] button.
Second Front Side
Front Plate
Important
Set the direction of the front plate and the
back plate of the cassette in reverse so the
cassette will not be absorbed onto the
magnet absorption plate.
Caution
Do not do anything that is not described until
you take out the cassette in
Step 11 .
Equipment may be damaged by the drive
unit and cassette contacting each other
when wrong operation is performed.
Note
Cassette may tilt toward the push plate unit
by vibration. Cassette will be straightened
by the press down operation, so there is no
need to reset the cassette.