Konica Minolta 0902, Service Manual

Page: 59 / 302

Chapter 3 Troubleshooting
3-5
3.2 Description of the Error Codes and How to Respond
3.2.1 06000 ~ 06037: Justifier Motor Errors
•
Error codes S column: Errors at the read operation/calibration.
•
Error codes E column: Errors during erase operation.
•
Error codes I column: Errors during initialization.
Error code Description of the error Response
(References to replacement methods are
listed at the end of the table.)
S E I
06000 06015 06030 Justifier HP sensor error
(when moving to HP)
Justifier HP sensor did not go
ON when the justifier guide was
moving to the home position.
Confirm following and replace the faulty parts.
•
Justifier HP sensor
•
Sensor wire: JP41 ~ MCN3 (MDU)
•
Justifier motor
•
Motor wire: JJ50 ~ MCN5 (MDU)
•
MDU
06001 06016 06031 Justifier motor control error
(when moving to HP)
There was a trouble with the motor
control when the justifier guide
was moving to the home position.
Confirm following and replace the faulty parts.
•
Justifier motor
•
Motor wire: JJ50 ~ MCN5 (MDU)
•
MDU
06002 06017 06032 Justifier HP sensor error
(when moving to cassette
fixing position)
Justifier HP sensor did not go
OFF when the justifier guide
was moving to the cassette
fixing position.
Confirm following and replace the faulty parts.
•
Justifier HP sensor
•
Sensor wire: JP41 ~ MCN3 (MDU)
•
Justifier motor
•
Motor wire: JJ50 ~ MCN5 (MDU)
•
MDU
06003 06018 06033 Justifier motor control error
(when moving to cassette
fixing position)
There was a trouble with the motor
control when the justifier guide was
moving to the cassette fixing position.
Confirm following and replace the faulty parts.
•
Justifier motor
•
Motor wire: JJ50 ~ MCN5 (MDU)
•
MDU
06004 06019 06034 Justifier motor control error
(when moving to minute
opening position)
There was a trouble with the motor
control when the justifier guide was
moving to the minute opening position.
06005 06020 06035 Justifier motor control error
(when moving to cassette fixing
position 2)
There was a trouble with the motor
control when the justifier guide was
moving to the minute opening position.
06006 06021 06036 Justifier HP sensor error
(when moving to HP 2)
Justifier HP sensor did not go
ON when the justifier guide was
moving from the cassette fixing
position to the home position.
Confirm following and replace the faulty parts.
•
Justifier HP sensor
•
Sensor wire: JP41 ~ MCN3 (MDU)
•
Justifier motor
•
Motor wire: JJ50 ~ MCN5 (MDU)
•
MDU
06007 06022 06037 Justifier motor control error
(when moving to HP 2)
There was a trouble with the motor
control when the justifier guide was
moving from the cassette fixing
position to the home position.
Confirm following and replace the faulty parts.
•
Justifier motor
•
Motor wire: JJ50 ~ MCN5 (MDU)
•
MDU