DCP 30 LX / DCP 30 SX
Safety
Issue: 11/2009
1
1
Safety
1 .1
Safety Notes
General Hints
• This operating manual is to be kept with the digital projector at all times.
• For safe and trouble free operation of the projector a good working knowledge of
basic safety regulations and the projector’s correct use is required.
• This operating manual contains the most important instructions for running the digital
projector safely.
• This operating manual must be read and understood by all persons working with the
projector, with particular emphasis on all aspects regarding safety.
• In addition, all valid regulations and measures concerning accident prevention must
be observed.
Owner’s Responsibilities
The owner is responsible to assure that all persons who work with and / or operate the
digital projector:
• are familiar with safe operating practices and accident prevention techniques and
have a complete working knowledge of the projector and all additional machines and
components of the system
• have read and fully understand the safety chapter and the warnings within this
operating manual.
• The owner must assure that safe working procedures are followed by personnel.
• The owner must assure that personnel are provided with the correct tools and safety
equipment.
Personnel’s Responsibilities
Those persons who work with the digital projector are responsible:
• to observe safe operating practices and accident prevention techniques
• to have read and fully understand the safety chapter and the warnings within this
operating manual.
Dangers when Working with the Digital Projector
Projectors are constructed according to the latest engineering and state-of-the art safety
standards. The projector is only to be employed for its intended purpose and is only
used when functioning absolutely perfectly.
Serious danger may result from improper use of the projector, causing injury to the user
or a third person, or damage may be done to the projector or other items in the vicinity.
Faults that could adversely affect safety must be rectified immediately.
The projector must not be used until any faults are rectified.
