DCP 30/70 L / DCP 30/70 S / DCP 30 LX/SX
Operation
Issue: 11/2009
39
• Push the
fokus
button (
+
or-) on the
button panel.
$
The focus motor (in lens holder) moves
the lens to the selected direction.
Loading a lens file
from the DCP Communicator software
• Go to
Configuration - Lens
and
click on
.
$
A list with different lens files opens.
• Select the desired file and click on
OK
.
$
The selected file will be executed - the lens will be adjusted.
X
NOTE
Changing the lens settings and saving to a macro is only possible at service mode.
4 .3 .1 .3 Shifting
Shifting vertically and horizontally can be carried out manually by turning adjusting
screws or remotely by pressing the shift buttons on the button panel.
X
NOTE
Z
With remotely controlled shifting, manual focusing should only be done in case of
need.
Z
Do not shift the picture into the border zones of the lens, because this will effect
shadowing of the picture.
Preparation for shifting:
• Adjusting the shift manually you have to remove the frontal cover plate of the
projector first.
• Switch on projector and xenon lamp.
• Project a suitable test pattern or content.
