DCP 30 LX / DCP 30 SX
Issue: 11/2009
72
• Loosen the anode cable on the
connecting bolt (wrench 17 mm).
• Loosen the Allen screw, which fasten
the bulb, by using a long Allen key
(5 mm) from the right outside of the
lamphouse (see figure).
• Carefully remove the xenon bulb and
wind the second hook-and-loop tape
around the cathode, to fix the protec-
tive coat.
ATTENTION
Do not bump the reflector - carefully guide the bulb around the corner.
• Remove the adapter on the bulb socket by loosening 2 fixing screws (Allen key 2.5).
Check the adapter for arcing spots, if necessary change it.
• Pack the old bulb - best will be, to use the original package.
6 .3 .1 .2 Inserting the Xenon Bulb
• Take the xenon bulb with the protective bonded fabric around out of its package.
• Fasten the adapter onto the cathode base (arrow) - leave bulb in its protective coat.
• Remove the hook-and-loop tape around the cathode.
