DCP 30 LX / DCP 30 SX
Issue: 11/2009
3
• To reduce the risk of electric shock, do not disassemble this equipment, but call in
qualified personnel when service or repair work is required. Incorrect reassembly can
cause electric shock when the appliance is used subsequently.
• The use of an accessory attachment not recommended by the manufacturer may
cause a risk of fire, electric shock, or injury to persons.
• Connect this appliance to a grounded circuit.
• Disconnect this unit from its source of supply before replacing the projection lamp.
• This appliance may have a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not modify the plug in any way.
SAVE THESE INSTRUCTIONS
1 .3
Explanations of Symbols and Notes
DANGER
This symbol indicates an imminent threat of danger to life and personal health.
Disregarding this warning can result in serious personal injuries or highly dangerous
injuries.
ATTENTION
This symbol indicates a possibly dangerous situation. Disregarding this warning can
result in small personal injuries or damage to projector
X
NOTE
This symbol indicates where notes, user tips and useful information can be found.
They serve to help use the projector to its fullest.
1 .4
Protective Devices
All existing safety devices must be checked regularly
1 .4 .1 Main Switch
In case of an emergency, you can
switch off the projector main switch
(console back).
Push the switch to position
O
.
Safety
