DCP 30/70 L / DCP 30/70 S / DCP 30 LX/SX
Issue: 11/2009
52
5 .2 .2 .3 Shortcuts for Test Patterns
With the aid of shortcuts the most important 10 test patterns can be
projected immediately.
• For activation, click on one of the shortcuts.
$
The shortcut button appears pressed in.
$
The name of the test pattern appears in the area beside
Test pattern currently displayed:
.
$
The selected test pattern will be projected as soon as the lamp is
ignited and the dowser is opened.
X
NOTE
The test pattern will be projected in the selected color space, even
when it was created in another color space.
• For deactivating the test pattern (off), click again on the shortcut or
click on
.
$
The test pattern will be cleared and all former settings will be over-
taken except of rezising, masking and anamorphic factor.
5 .2 .3 Service
Settings can only be carried out by the service.
Here you will find the measured value of the CLO sensor (only
at normal mode). This is only an information and does not cor-
respond to the real light output.
