DCP 30 LX / DCP 30 SX
Issue: 11/2009
12
• Anamorphic lens holder (option)
9
manually adjustable
9
remotely adjustable
9
Anamorphic lens
• Rectifier
9
KEX 110
9
KEX 170
• Button panel mounted in side or rear projector panel
• Touch panel PC (option)
• DCP Communicator (software)
• Input Scaler / Switcher (option)
• Operating manuals
2 .3
Installation
ATTENTION
U
The projector will be delivered completely wired and factory tested.
U
Only use suitable hoisting machines (crane, fork-lift).
U
Do not use unit parts as climbing aid.
U
Electrical connections have to be in accordance with local regulations and be
installed professionally.
U
All installation should only be carried out by trained service personnel.
2 .3 .1 Place of Installation, Place of Operation
• This projector is intended for installation in a restricted access projection room.
• Projection room must be well ventilated or cooled (30° C max.) (86° F max.) in order
to avoid build up of heat. It is necessary to vent hot exhaust air via an exhaust device
from projector to the outside of the building.
• The place on which the projector will be installed must be even, solid and clean.
