Kikusui PAT160-25T, Operation Manual

Page: 148 / 218

7-42
PAT-T 4KW
SYST:OPT
Queries the hardware interface board that is installed in the PAT.
This command is the same as *OPT?.
Command
SYSTem:OPTion?
Response
Returns 0 if there is no option installed in response to SYST:OPT?.
If the factory option GPIB, USB or LAN interface board is installed, “GPIB”,
“USB” or “LAN” is returned in response to SYST:OPT?.
SYST:REM (RS232C, USB and LAN only)
Sets the PAT operation to remote mode. All panel keys except the LOCAL key are
locked. This is a substitute command for the IEEE488.1 REN message (Remote
Enable) and address designation.
SYST:LOC is used to return to local mode.
Command
SYSTem:REMote
SYST:RWL (RS232C, USB and LAN only)
Sets the PAT operation to remote mode. All panel keys are locked (LOCAL key is
also locked). This is a substitute command for the IEEE488.1 llo message (Local
Lock Out).
SYST:LOC is used to return to local mode.
Command
SYSTem:RWLock
SYST:VERS
Queries the version of the SCPI specifications to which the PAT conforms.
Command
SYSTem:VERSion?
Response
Returns SCPI 1999.0 in response to SYST:VERS?.