Kikusui PAT160-25T, Operation Manual

Page: 162 / 218

8 -4
PAT-T 4kW
2
Attach the u pper lo u ver first.
The shapes of the upper and lower dust filters are different. The upper dust filter has a
cutout.
Align the tab on the inner side of the louver to the panel groove and slide the louver to the
left to attach it.
You can easily attach the louver by aligning the long tabs (five locations) with the grooves.
Fig. 8 -4 D u st filter as seen from the rear
Fig. 8 -5 Lo u ver attachment
3
Attach the lo w er lo u ver in the same manner as step 2 .
• Pay attention to the shape of the d u st filter w hen attaching the lo u ver to
the panel. If yo u attempt to attach the w rong lo u ver by force, the lo u ver
may break.
Dust filter cutout
Upper dust filter
Lower dust filter
Groo v e for attaching the upper lou v er
Pass the long ta b s on the b ack side of the
lou v er through the groo v es on the panel
indicated b y circles (10 locations) in the
figure b elow.
Ta b (long)
Dust filter
Ta b (short)
Upper lou v er
Groo v e for attaching the lower lou v er
Slide the lou v er to the left to lock the lou v er in place.
CAUTION