Kikusui PAT160-25T, Operation Manual

Page: 41 / 218

PAT-T 4kW
3-7
3
Conn
ecting the
Lo
ad
Connection preparation
1
T u rn the POWER s w itch off.
2
Using the chassis connection w ire set that comes w ith the package,
connect the chassis terminal to either the negative or positive DC
o
u tp u t terminal.
The output terminal has a hole used to connect the chassis connection cable that comes
with the package.
Fig.3-7 Connecting the chassis connection w ire
3
Attach crimping terminals to the load cable.
The output terminal has a hole for connecting the load cable. Attach the crimping
terminal that matches the bolt used.
4
Insert the load cable thro u gh the OUTPUT terminal cover.
5
Connect the load cable on the rear panel.
Insert the bolt for the positive (+) terminal from right side, and the negative (-) terminal
from left side as you face, then fix it using the nut and spring washers. Connect the
load cable straight forward (vertical angle against the surface of the output terminal).
Fig.3- 8 Connection of the load cable
Chassis connection wire
Screw
Bolt
Crimp terminal
OUTPUT terminal co v er
Nut
Spring washer