Kikusui PAT160-25T, Operation Manual

Page: 146 / 218

7-40
PAT-T 4KW
FETC:VOLT / MEAS:VOLT
Queries the measured value of the voltage output.
Command
FETCh[:SCALar]:VOLTage[:DC]?
MEASure[:SCALar]:VOLTage[:DC]?
Response
Returns the measured value of the voltage output in the NR3 form in response to
FETC:VOLT? / MEAS:VOLT?.
FETC:CURR / MEAS:CURR
Queries the measured value of the current output.
Command
FETCh[:SCALar]:CURRent[:DC]?
MEASure[:SCALar]:CURRent[:DC]?
Response
Returns the measured value of the current output in the NR3 form in response to
FETC:CURR? / MEAS:CURR?.
7.14.4 Aborting the Operation
Aborts the operation in all sequence groups.
ABOR
Aborts operations such as setting, change, and measurement in all sequence groups.
The trigger status immediately after the power is turned on is the same as the
condition when the ABOR command is sent. If the ABOR command is sent when
the change or measurement is already started, the measured data of the sequence 3
group remains invalid.
If the ABOR command is sent when the sequence 3 group is not initiated and the
measured data that is held is valid, the measured data is not discarded.
A specific sequence group cannot be specified with the ABOR command. It is
always interpreted as ALL.
Command
ABORt