Kikusui PAT160-25T, Operation Manual

Page: 138 / 218

7-32
PAT-T 4KW
Response
Returns whether recalling of the preset memory is allowed when the keys are locked
in the NR1 form in response to MEM:KLOC?.
7.14 Trigger Function
Specifies settings related to the trigger function.
Setting the trigger
The trigger is classified into three sequence groups, TRIGger[:SEQuence[1]],
TRIGger:SEQuence2, and TRIGger:SEQuence3.
There are two second level nodes for each sequence in the TRIGger subsystem. The
same operation is carried out regardless of the node that is used.
■
Sequence 1
Trigger subsystem that changes the settings
Second level node: SEQuence[1] or TRANsient
■
Sequence 2
Trigger subsystem for the output on/off delay
Second level node: SEQuence2 or OUTPut
■
Sequence 3
Trigger subsystem for measurements
Second level node: SEQuence3 or ACQuire
7.14.1 Setting Changes (Sequence 1: TRANsient Settings)
p. A-19
The sequence 1 group can synchronize the output changes using triggers.
When ABOR is sent, INIT:SEQ1 is cancelled. The VOLT:TRIG setting does not
change.
If the voltage (VOLT) is changed, the voltage setting that is applied with a trigger is
cancelled and overwritten to the VOLT setting. Table 7-8 shows the responses when
the voltage is set to 20 V (VOLT 20) and when the voltage setting that is applied
with a trigger is set to 10 V (VOLT 10).
See