4-2
PAT-T 4kW
4.1
Phase input mode
(Single-phase input, Three-phase input)
The input power mode of the PAT (4 kW type) can be switched to either three-phase
input or the single-phase input.
Before starting the operation, confirm the status of phase input mode. To verify the
status and setting of the phase input mode, refer to the “4.7 CONFIG Settings”.
The principal of difference in specifications for the phase input mode are described
as follows.
The detailed product specifications can be referred in the “9.1 Specifications”.
Table 4-1
Major difference of the phase inp
u
t mode
•
If the inp
u
t po
w
er connected to the single-phase inp
u
t
w
iring
w
hile the
PAT is set to the three-phase inp
u
t mode, the f
u
nction of “Inp
u
t open-
phase protection (PHASE)”
w
ill be activated and the ALARM LED lights
on. On the other hand, If the inp
u
t po
w
er connected to the three-phase
inp
u
t
w
iring
w
hile the PAT is set to the single-phase inp
u
t mode, the
o
u
tp
u
t c
u
rrent
w
ill be limited to 75 % of the rating of three-phase inp
u
t
mode. Confirm the stat
u
s of phase inp
u
t mode and the inp
u
t
w
irings
properly.
See
See
Descriptions
Three-phase inp
u
t mode
Single-phase inp
u
t mode
O
u
tp
u
t po
w
er
4 kW
3 kW
O
u
tp
u
t c
u
rrent setting range
0 % to 105 % of rtg
*1
0 % to 105 % of rtg x 75 %
Overc
u
rrent protection
(OCP) setting range
10 % to 111.5
％
of the rated o
u
tp
u
t
c
u
rrent
(10 % to 111.5
％
x 75 %) of the rated
o
u
tp
u
t c
u
rrent
Inp
u
t open-phase protection
(PHASE)
T
u
rns the o
u
tp
u
t off. ALARM LED
ill
u
minates.
Cancels the Inp
u
t open-phase
protection feat
u
re.
(Monitor signal o
u
tp
u
t)
(IMO
N
) (C
u
rrent)
at rated c
u
rrent o
u
tp
u
t
10.00 V
0.25 V
7.50 V
0.25 V
The
u
pper limit is set at 75 % of the
rating of the three-phase inp
u
t mode
(External control)
EXT-V CC CO
N
T
(CC external voltage control)
0 % to 100 % of the rated o
u
tp
u
t
c
u
rrent
in the range of 0 V to 10 V
0 % to 75% of the rated o
u
tp
u
t c
u
rrent
(of the three-phase inp
u
t mode) in the
range of 0 V to 7.5 V.
EXT-R CC CO
N
T
(CC external resistance
control normal)
0 % to 100 % of the rated o
u
tp
u
t
c
u
rrent
in the range of 0 k
Ω
to 10 k
Ω
.
0 % to 75 % of the rated o
u
tp
u
t
c
u
rrent (of the three-phase inp
u
t
mode) in the range of 0 k
Ω
to 7.5 k
Ω
EXT-R CC CO
N
T
(CC external resistance
control fail safe)
100 % to 0 % of the rated o
u
tp
u
t
c
u
rrent
in the range of 0 k
Ω
to 10 k
Ω
75 % to 0 % of the rated o
u
tp
u
t
c
u
rrent (of the three-phase inp
u
t
mode) in the range of 0 k
Ω
to 7.5 k
Ω
*1. rtg : Indicates the rated o
u
tp
u
t
CAUTION
Summary of Contents for PAT160-25T
