Kikusui PAT160-25T, Operation Manual

Page: 108 / 218

7-2
PAT-T 4KW
7.1 Remote Control Overview
In addition to using the front panel, the PAT can be controlled remotely using the
following interfaces.
• RS232C interface
• GPIB interface (factory option)
• USB interface (factory option)
• LAN interface (factory option)
The PAT is equipped with RS232C as standard.
If the factory option interface board is installed, you can use GPIB, USB or LAN.
The GPIB, RS232C, USB and LAN interfaces cannot be used simultaneously.
The remote interface complies with IEEE Std 488.2-1992 and SCPI Specification
1999.0.
p. 7-11
Use the SCPI commands only after you have understood the SCPI command syntax
for the PAT.
When the PAT is operating under remote control, the RMT LED on the display on
the front panel illuminates. To switch from the remote mode to the local mode
(panel operation) from the panel, press the LOCAL key.
7.2 Instrument Interface Standards
The PAT conforms to the following standards.
• IEEE Std 488.2-1992 IEEE Standard Codes, Formats, Protocols, and Common
Commands For Use With IEEE Std 488.1-1987
• IEEE Std 488.1-1987 IEEE Standard Digital Interface for Programmable
Instrumentation
• Standard Commands for Programmable Instruments (SCPI) version 1999.0
• Universal Serial Bus Specification Rev 2.0
• Universal Serial Bus Test and Measurement Class Specification (USBTMC) Rev
1.0
• Universal Serial Bus Test and Measurement Class, Subclass USB488
Specification (USBTMC-USB488) Rev 1.0
• TCP/IP instrument Protocol Specification VXI-11 Rev 1.0
See