PAT-T 4KW
7-29
7
Remot
e
Cont
ro
l
Setting the breaker trip
SYST:CONF:BTR
Sets the breaker trip (turn the POWER switch off).
Command
SYSTem:CONFigure:BTRip[:IMMediate]
Setting the master-slave parallel operation
SYST:CONF:PAR
Sets the number of units in Master-Slave Parallel Operation. It enables to set only
for the Master unit. It can not be set when the output is turned on.
Command
SYSTem:CONFigure:PARallel {1|2|3|4|5}
SYSTem:CONFigure:PARallel?
Parameter
Val
u
e:
1 to 5 (The default value is 1.)
Response
Returns the setting numbers of Master-Slave Parallel Operation in the NR1 form in
response to SYST:CONF:PAR?.
SYST:CONF:MSL
Sets the PAT condition during master-slave parallel operation.
Command
SYSTem:CONFigure:MSLave {MASTer|PARallel}
SYSTem:CONFigure:MSLave?
Parameter
Val
u
e:
PARallel
Slave unit
MASTer
Master unit or independent operation (default)
Response
Returns the PAT status under master-slave parallel control as character data in
response to SYST:CONF:MSL?.
Summary of Contents for PAT160-25T
