Kikusui PAT160-25T, Operation Manual

Page: 120 / 218

7-14
PAT-T 4KW
Special form numeric parameter
The special form numeric parameters MINimum and MAXimum can be used as
substitutes for limit values when the parameter is numeric.
In the example below, the overcurrent protection is set to the minimum value.
CURRent:PROTection MINimum
The minimum and maximum values can be inquired for most parameters using
queries.
CURRent:PROTection? MIN
CURRent:PROTection? MAX
Measurement unit
Below are the default measurement units. Commands are accepted even if
measurement units are not specified.
• V (voltage) • A (current) • S (second)
The following optional prefixes are supported. To enter “
μ
” in the parameter, use
“U” instead.
• M (milli) • U (micro)
• The unit symbols in the International System of Units contain lowercase
characters. The IEEE standard uses uppercase characters. SCPI commands are
not case sensitive.