JBT FoodTech Frigoscandia GYRoCOMPACT M7, Installation Manual

Page: 89 / 288

3
1000-07-01GB-29-00
INSTALLATION
INSTALLATION MANUAL
7. Check that the side links interlock at the
transfer point. If not, one or more of the
following is true:
a. The ball rails / infeed rails are not correctly
adjusted.
b. The freezer belt is damaged.
c. The force pulling the belt is to low at the
infeed rails.
8. Check the function and setting of the “Belt
out of position switch” by doing the
following:
a. Check the function and adjustment of the
limit switch by turning the arm.
b. Measure the distance between the belt side
links and the arm.
9. Check if the transfer takes place within 50
mm
after
the designed transfer point. There
must be a space at the designed transfer
point.
10. Check the clearance between the ball chain
and the belt foot where the ball chain leave
the stack.
~~~
16. The belt side link interlock
17. The belt transfer point
18. The clearance between the belt foot and the
chain, where the chains leave the stack
3 mm
3 mm
7
8
8
10
0–50 mm
9
Designed
transfer point
S
pa
ce
9