JBT FoodTech Frigoscandia GYRoCOMPACT M7, Installation Manual

Page: 114 / 288

4
INSTALLATION
1000-07-01GB-26-06
The setting of 10 measurements / second is normally OK. At the
recommended speed of 1 stack revolution/minute, there is room
for more than 100 tiers, 60 seconds x 10 samplings per second
x 100 tiers = 60000.
Note!
Leave the other fields in the screen unchanged.
4. Click
Accept (D) to save the settings.
Load cell channels
The logger has three different channels for load cells. It makes it
possible to use the logger for other type of measurements.
The channel to be used for belt tension measurement has to be
provided with the correct load cell data, as described in the fol-
lowing steps below.
Note!
Use channel 1, marked Force Sensor 1, on the logger for belt
tension measurements. To avoid connecting to the wrong
channel and not getting data, fill in the load cell data in all three
channels.
Set load cell data.
5. Select the tab or button market Sensor scale (E)
E
D