J&J Amusements Double Eagle - Electric Service Manual Download

Page: 40 / 275

1-6

ES,

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

Pull tube out of tire.

CHANGING TIRES & TUBES - DISASSEMBLY

Loosen the 3/8” nuts from the back side of the tire

assembly and remove all hardware.

Remove the rim half from the valve stem side

of the tire. ( J&J part #3-96-A0001 Bead Breaker

recommended) Remove the tube from the tire so

that is does not get pinched. Flip the tire over and

press out the other rim half.

Make sure to de

ate the tire completely, either by

removing the valve core or depressing the valve core

until all the air is released.

DANGER

Attempting to disassemble an in

ated tire can result

in injury.

Tubes: J&J # 00780-M, Tube, 3.40/3.00-5”

(Bent stem, 45-degree middle)

See the bead breaker tool (#3-96-a0001) online at

http://www.youtube.com/watch?v=9o0dHeY9gnk

TUBES - GO KART TIRE

Part#

Description

Price

00780-M

Tube, 3.40/3.00-5” (Bent Stem 45 degree Middle (BEST)(FPX)

$3.80

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands