J&J Amusements Double Eagle - Electric Service Manual Download

Page: 138 / 275

7-24

BRAKES

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

Grab both brake shoes as shown and pull inwards to

release the tension on the retaining springs.

Remove the springs and shoes; discard worn shoes.

RPM/SPEED GAUGES

Part#

Description

Price

1-60-0206

Gauge, MPH Go-Kart (Vortex) 0-60 mph

$179.00

SOME OF THE FEATURES OF THE VORTEX PRO:



Simple - The display will automatically “wake up” and show the current speed once the wheel is turning: no on/o

ﬀ

buttons to worry about. Checking the max speed, average speed, and other stored items is simple and easy: there is
almost nothing to learn.



Rugged - The Vortex is drop-proof and intended for use in a demanding environment.



Accurate - The Vortex is accurate to within 0.5 mph (0.8 kph) from 2 to 60 mph (3 to 100 kph).



Inexpensive - The Vortex is priced for maximum value: quality, hand-made parts and elegant design at a very attractive price.

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands