J&J Amusements Double Eagle - Electric Service Manual Download

Page: 79 / 275

5-3

ROLL BARS & PADS

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899

www.jjamusements.com

ROLL BAR / REMOVABLE TO ALLOW BODY SERVICE

(SIDEWINDER, DOUBLE AND SINGLE)

Some roll bars are mounted through the body

(Sidewinder go karts) and are detachable to allow for

body removal. A clipped hitch pin secures the roll bar.

A locking set screw holds the roll bar in place and

prevents it from rattling.

Acorn nuts are used to help reduce the possibility of

injury from exposed threads.

NOTE:

Make sure acorn nuts are installed and the seat belt

pads are secured in their proper position with the

seam away from the rider.

Seat belt pads are captured underneath the seat belt

bracket to prevent twisting of the pads on the belt.

Bracket

Pad

Acorn nut

#010771

12” seat belt extension,

Flip style.

SEAT BELTS

Part#

Description

Price

010771

Seatbelt Extension, 12” (Flip Buckle)

$49.99

1-60-0069C

Seatbelt Extension, 12”(Push Button Style Canada & Kreative)

$45.00

#1-60-0069C

12” seat belt extension, push button style.

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands