J&J Amusements Double Eagle - Electric Service Manual Download

Page: 199 / 275

12-5

BODY MOUNTS

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899

www.jjamusements.com

EAGLE /TALON SIDE PANELS/FENDERS

OVERVIEW

The Eagle/Talon go-kart utilizes the same frame as most other J&J go-karts. The panels and other fabricated steel parts are

simple, bolt-on items.

The side panels span between the frame spindle mounts and the roll bar/body mount.

The formed plastic wing is rubber-mounted via special grommets in the mounting holes to “

oat,” which helps to eliminate

stress cracks in the plastic. The wing also protrudes toward the rear of the go-kart to keep patrons and attendants away

from the hot exhaust on gas-powered go-karts.

The fenders are safety-related item that operate by helping to keep dirt and/or other track debris from getting into the

rider’s eyes. The fenders are bolt-on pieces and easily replaced when damaged.

Wing

Fender

Side panel

Double Eagle go-kart shown

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands