J&J Amusements Double Eagle - Electric Service Manual Download

Page: 33 / 275

0-27

SPEC

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899 www.jjamusements.com

FUEL

Remove the

ller cap and check the fuel level.

ll the tank if the fuel level is low. Fill 1” from the

lowest point of the

ller neck.

WARNING

Do not over

ll the fuel tank.

Ensure that the

ller cap is securely replaced.

Extra Capacity Fuel Tank:



2.2 gal ......... (8.3 liters)



3.3 gal .......(12.4 liters)



3.5 gal .......(13.2 liters)



4.75 gal ....(17.9 liters)

Warning tag

DO NOT FILL FUEL INTO
THE FILLER NECK.

Allow approximately 1” of

airspace inside the tank

to prevent spillage due

to the sloshing of fuel.

Use unleaded gasoline with a pump octane rating of

86 or higher.

The Honda™ engine is certi

ed to operate on

unleaded gasoline.

Unleaded gasoline produces fewer engine and spark

plug deposits and extends exhaust system life.

Never use stale or contaminated gasoline or a

premixed (oil/gasoline) mixture. Avoid getting dirt or

water in the fuel tank.

Read and understand the WARNING tag.

WARNING

GASOLINE IS HIGHLY FLAMMABLE AND EXPLOSIVE.

You can be burned or seriously injured when handling

fuel.



Keep heat, sparks, and

ame away.



Handle fuel only outdoors.



Wipe up spills immediately.

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands