J&J Amusements Double Eagle - Electric Service Manual Download | Manualshive

Page: 194 / 275

background image

11-8

CARBURETOR

Speci

fi

cations and prices subject to change without notice. Download latest update to this manual on-line.

Plastic Polish

5 GALLON

1 GALLON

32 OZ SPRAY

PROTECTANT

CLEANERS & PROTECTANTS

Part#

Description Price

00316

Cleaner, Protect All Cleaner

$19.26

00317

Cleaner, Protect All Wash

$14.81

00320

Cleaner, Protect All 13oz Aerosol Spray

$14.81

SFG-Q

Cleaner, Fiberglass 32

fl

oz

$8.93

SZP-Q

Cleaner, Boat Zoap (1 Quart)

$10.57

3-60-0033

Protectant, 303 Aerospace 2 oz. pump sprayer

$2.75

3-60-0034

Protectant, 303 Aerospace 32 oz. trigger sprayer

$24.43

3-60-0035

Protectant, 303 Aerospace 128 oz. gallon re

fi

ll

$64.21

3-60-0037

Protectant, 303 Aerospace 5 gallon Bucket

$279.99

3-60-0078

Cleaner, Spray Cleaner/Polish

$9.99

6985634

08732-0010 Cleaner Contact (Formulated for California)

$4.75

It is important to maintain your go karts and bumper boats and keep them clean. This will make them more attractive for
your customers, prolong their life and keep them safe.

PROTECT YOUR INVESTMENT AND KEEP YOUR GO KARTS LOOKING NEW.



Faded go kart bodies? Cracked seat pads?



303 aerospace protectant is the answer.

We’ve all witnessed what the sun’s damaging UV light can do to

fi

berglass, paint, vinyl, etc. Go karts, bumper boats and

probably most of the products used at your facility use some or all of these components. So how do you protect and keep

them looking fresh during their long service life?

The answer is to protect the surface with sunscreen, and 303’s Aerospace Protectant has it, SPF 40! That’s Sun Protection
Factor 40! This non-silicone-based sunscreen is not a cleanser.

1.

Use mild soap and water to clean your

fi

berglass and seat pads

fi

rst.

2.

Rinse with clean water.

3.

Then simply spray on and wipe in the 303, just like you would on your own body.

WITH REGULAR USE, 303 WILL KEEP YOUR GO KARTS AND BUMPER BOATS LOOKING FRESH AND SHINY...
YOUR CUSTOMERS WILL APPRECIATE IT TOO.

JUST LIKE THE BIG WAREHOUSE STORES, AT J&J YOU CAN PURCHASE BULK QUANTITIES AND SAVE MONEY!

«
...
192
193
194
195
196
...
»

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Reviews:

No comments

Related manuals for Double Eagle - Electric

Brand: Baja motorsports Pages: 15

Brand: E-Z-GO Pages: 66

Brand: Jacobsen Pages: 64

Brand: Taylor-Dunn Pages: 109

Brand: B&P Manufacturing Pages: 6

Brand: Suzuki Pages: 215

Brand: Strongway Pages: 15

Brand: swaploader Pages: 94

Brand: Costway Pages: 7

Brand: Humbaur Pages: 4

Sportsman 9921837

Brand: Polaris Pages: 133

Brand: Landoll Pages: 80

Brand: KAYO MOTOR Pages: 99

Brand: Taylor-Dunn Pages: 180

K550ATV EEC 4x4

Brand: FEISHEN Pages: 102

Brand: Yamaha Pages: 122

Brand: Yamaha Pages: 98

Brand: Polaris Pages: 325

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands