J&J Amusements Double Eagle - Electric Service Manual Download

Page: 135 / 275

7-21

BRAKES

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899

www.jjamusements.com

CHANGING BRAKE SHOES

To gain access to the drum brake system, it is

rst

necessary to remove the engine (page 8-1) and

plastic axle cover (page 6-3).

Start by removing the right rear wheel from the go-

kart (page 1-5).

Remove the axle nut (1-1/16”) and axle collar from

the axle and place to the side.

NOTE:

The axle collar is recessed on the side facing

the brake drum.

Slide the hub/drum assembly o

ﬀ

of the axle to ac-

cess the brake shoes.

Axle collar

Axle nut, 1-1/16”

Kartrol is a solid-state, electronic engine

speed limiter used on go kart motors

to reduce the engine RPM by remote

control. This gives the track operator

more control over the track operation,

enabling him to reduce the speed of an

individual kart, a group of karts, or all

the karts at will.

As an optional part of the system, a

device can be mounted near the pit

entrance that, when activated, will

reduce RPM of every kart that passes

by it, without a

ﬀ

ecting karts elsewhere

on the track. This greatly improves

safety in the pit area.

#1-60-9006

#1-60-9803

#1-60-9004

#1-60-9005

#1-60-9017

KARTROL EXE (GAS & ELECTRIC GO KARTS)

Part#

Description

Price

1-60-9005

Kartrol EXE, Console Table Top (Wireless)

$1,360.99

1-60-9004

Kartrol EXE, Console Hand Held (Wireless)

$1,360.99

1-60-9006

Kartrol EXE Yellow, Programmer/Shop Tester

$410.00

1-60-9049

Kartrol, EXE Micro Transmitter Wall Mount (Track 1)

$699.00

1-60-8008

Kartrol Micro, Receiver (Falcon/EBB Code 2)

$320.00

1-60-8007

Kartrol Micro, Transmitter (Falcon/EBB Code 2)

$410.00

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands