J&J Amusements Double Eagle - Electric Service Manual Download

Page: 84 / 275

5-8

ROLL BAR & PADS

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

Bodied go karts such as Sidewinder, Sidewinder

Double, and Stinger have the lap belt attached to the

body instead of the chassis.

NOTE:

Orient the seat belt mounting tabs as shown.

The backside of the lap belt attachment utilizes a

fender-style washer (large/

at) to keep the bolt from

pulling through the body.

When installing new seat belt pads, it’s easiest to use

a sti

ﬀ

wire or coat hanger to pull the belt through the

pad. Just bend a small hook in the sti

ﬀ

wire to grab

the hole in the seat belt mounting bracket.

NOTE:

Tape the hook end so it does not tear the

inside of the new pad as you pull it through.

Lap belts on bodied go karts

Seat belt pads

new pads pic

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands