J&J Amusements Double Eagle - Electric Service Manual Download

Page: 174 / 275

9-8

FUEL TANKS

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

EVAPORATIVE SYSTEM MAINTENANCE

To check that the carbon canister is not

plugged, remove the fuel tank vent line from

the filler neck.

Using compressed air, gently blow air

through the vent system.

Check that air is coming out of the end of

the vent located in front of the rear tires.

Also check that air is coming out of the vent

hose connected to the engine’s air cleaner.

NOTE:

If fuel comes out the vent hoses, the canister

may be saturated with fuel and should be

replaced.

Vent hose

Blow air

Vent end

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands