J&J Amusements Double Eagle - Electric Service Manual Download

Page: 170 / 275

9-4

FUEL TANKS

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

ENGINE-MOUNTED FUEL TANK REMOVAL

J&J extra-capacity fuel tanks are mounted to the

original Honda fuel tank mount bosses cast as part of

the engine. These tanks use machined brass inserts

cast into the cross-linked plastic during the molding

process. Threads for the outlet

ttings are also cast

into the plastic.

These fuel tanks have an excellent record for

longevity, however, engine vibration and heat will

eventually cause the inserts to loosen and possible

cracks to occur. There is no repair for this condition,

and the fuel tank must be replaced.

NOTE:

Always use the proper length bolts when

attaching the fuel tank to the engine. Improper bolt

length can cause irreparable damage to the fuel tank.

The heat shield (on models equipped with 2.2 gallon

fuel tanks) is held in place with two bolts and one

screw as shown in the photos.

Bolt “A” mounts through the shield, then the engine

boss and into a threaded insert in the tank.

NOTE:

The anti-vibration pad should be adjusted

so that it is touching the fuel tank. This rubber piece

reduces vibration of the heat shield that may lead to

cracks around the mounting holes.

Screw

Bolt

Anti-Vibration pad

Bolt

Bolt “A”

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands