J&J Amusements Double Eagle - Electric Service Manual Download

Page: 127 / 275

7-13

BRAKES

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899

www.jjamusements.com

Remove the brake adjuster bolts.

Disconnect the brake pedal spring. Use pliers to pull

and guide the spring from the hole on the frame.

Unbolt the 3/8” nut and remove the 3/8” x 4” bolt.

Remove the brake pedal.

The brake pedal bronze bushings (#1-60-0291) are

replaceable (see page 10-12).

See page 7-12 for brake pedal adjustment.

BRAKE PEDAL REMOVAL

303 PROTECTANT

Part#

Description Price

3-60-0033

Protectant, 303 Aerospace 2 oz. pump sprayer

$2.75

3-60-0034

Protectant, 303 Aerospace 32 oz. trigger sprayer

$24.43

3-60-0035

Protectant, 303 Aerospace 128 oz. gallon re

$64.21

3-60-0037

Protectant, 303 Aerospace 5 gallon Bucket

$279.99

It is important to maintain your go karts and bumper boats and keep them clean. This will make them more attractive for
your customers, prolong their life and keep them safe.

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands