J&J Amusements Double Eagle - Electric Service Manual Download

Page: 111 / 275

6-25

AXLES

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899

www.jjamusements.com

The axle has two 1-1/4” (2 piece) split collars.

One on the inside of the drive axle bearing and one

on the inside of the

oater hub axle bearing.

The split collars are installed to keep the axle from

shifting during side impacts.

Apply blue Loctite® on each of the split collar Allen

bolts.

Loosely install the split collar on the axle and slide it

up against the inside of the drive bearing.

Evenly tighten the Allen bolts by using a 3/16”

T-handle Allen wrench.

Install the split collar on the

oater-side axle bearing

in the same order as performed on the drive-side

axle bearing.

Rotate the axle so the Allen bolts are facing down.

Use the 3/16” T-handle Allen wrench between the

frame and axle bearing; evenly tighten the Allen

bolts.

SPLIT COLLARS HELP KEEP YOUR AXLE FROM SHIFTING.

Split collar, 1 1/4” (2 piece) #1-60-0065

SPLIT COLLAR

Part#

Description

Price

1-60-0065

Split Collar, 1 1/4” (2 Piece)

$7.53

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands