J&J Amusements Double Eagle - Electric Service Manual Download

Page: 176 / 275

9-10

FUEL TANKS

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

GAS CADDY



UL-approved, 2-way, heavy-duty rotary pump.



Non-conductive aluminum feet for proper grounding and spark resistance.



8ft. suction/discharge hose with anti-static ground.



2in.

ll neck for safe addition of outside fuel/

uids.



Fill level gauge shows tank levels.



10in. heavy-duty steel wheels with semi-pneumatic tires.



30 gallons capacity.



Durable, powder-coat

nish.

Note: Nozzle is not included with Gas Caddy

GAS CADDY

Part#

Description Price

00223

Gas Caddy, Complete 30 Gal.

$565.00

3-60-0066

Pump, Gas Caddy (Blackmer) Optional for Gas Caddy One Way Fl

$209.59

C200

Pump, Gas Caddy

$202.00

C203

Gas Caddy, Vent Dome Assy

$28.65

C204

Hose, Assembly (Gas Caddy)

$58.14

C205

Gas Caddy, Gauge Assembly

$63.21

C206

Gas Caddy, Ground Wire Assembly

$21.45

C207

Gas Caddy, Filler Neck

$16.07

3-60-0047

Gas Caddy, Wheel Kit (two wheels per kit)

$37.99

C618

Gas Caddy, Cap

$12.24

C629

Gas Caddy, O-Ring (Large)

$4.55

002172

Gas Caddy, Repair Kit For Tank Gauge

$33.66

3-60-0071

Gas Caddy, Wheel Retaining Clip

$1.12

#C200

#00223

#002172

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands