J&J Amusements Double Eagle - Electric Service Manual Download

Page: 197 / 275

12-3

BODY MOUNTS

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899

www.jjamusements.com

The reinforced

berglass body rests on rubber

bumpers that support and isolate the body from the

frame. Eye bolts are used to secure the hold-down

straps.

Bumpers are bolted to the mounting brackets and

are easily replaced if damaged.

The side of the F-22 body is rubber-mounted to the

frame, just in front of the rear wheels.

NOTE:

Make sure the rubber “well” nut is in place to

isolate the body from the frame.

BODY MOUNTS - F-22 GO-KART

Eye bolts

Bumper

GREAT PRODUCT FOR SMALLER FLEETS!

Requires just 4 to 15 strokes to create a powerful vacuum. The integrated container (6.5

liters) then neatly captures the oil, preventing messy spills. The calibrated walls allow easy

measurement of the oil extracted. A built-in

oat switch automatically stops extraction as

soon as capacity is reached. A pour spout facilitates emptying. The Big PELA is a durable,

maintenance-free unit. It is ideal for professional use.

#5958434, Hand oper-

ated oil extractor

OIL CHANGING SUPPLIES

Part#

Description Price

5958434

07999-ZW7-000AH Oil Extractor, 6.5 litr

$110.15

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands