J&J Amusements Double Eagle - Electric Service Manual Download

Page: 181 / 275

10-5

THROTTLE

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899

www.jjamusements.com

Disconnect the throttle cable from the engine.

Remove the cable from the throttle cable override

springs on the gas pedal.

Loosen the adjuster nut and slide the cable end out

of the throttle bracket.

THROTTLE CABLE REMOVAL

Push cable

RPM/SPEED GAUGES

Part#

Description

Price

1-60-0206

Gauge, MPH Go-Kart (Vortex) 0-60 mph

$179.00

SOME OF THE FEATURES OF THE
VORTEX PRO:



Simple - The display will automatically “wake up” and show the current speed once the wheel is turning: no on/o

ﬀ

buttons to worry about. Checking the max speed, average speed, and other stored items is simple and easy: there is
almost nothing to learn.



Rugged - The Vortex is drop-proof and intended for use in a demanding environment.



Accurate - The Vortex is accurate to within 0.5 mph (0.8 kph) from 2 to 60 mph (3 to 100 kph).



Inexpensive - The Vortex is priced for maximum value: quality, hand-made parts and elegant design at a very attractive price.

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands