J&J Amusements Double Eagle - Electric Service Manual Download

Page: 99 / 275

6-13

AXLES

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899

www.jjamusements.com

Remove the drive hub pulley from the axle.

Before installing the drive hub, inspect the key stock

and the drive hub keyway. If the drive hub keyway or

the key stock show any signs of damage, the drive hub

and/or the key stock must be replaced.

Install the drive hub in the reverse order of removal.

Before tightening the two Allen bolts, the drive hub

will need to be aligned with the engine driven pulley.

Loosen the 8 bolts holding the sprocket to ensure

proper clamping to the axle.

A straight edge can be used to aid in belt alignment

during reassembly. Place a straight edge along the

bottom pulley and hold it

rmly against two sides of

the pulley. The top pulley should line up just inside the

ange edge.

RPM/SPEED GAUGES

Part#

Description

Price

1-60-0206

Gauge, MPH Go-Kart (Vortex) 0-60 mph

$179.00

SOME OF THE FEATURES OF THE
VORTEX PRO:



Simple - The display will automatically “wake up” and show the current speed once the wheel is turning: no on/o

ﬀ

buttons to worry about. Checking the max speed, average speed, and other stored items is simple and easy: there is
almost nothing to learn.



Rugged - The Vortex is drop-proof and intended for use in a demanding environment.



Accurate - The Vortex is accurate to within 0.5 mph (0.8 kph) from 2 to 60 mph (3 to 100 kph).



Inexpensive - The Vortex is priced for maximum value: quality, hand-made parts and elegant design at a very attractive price.

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands