J&J Amusements Double Eagle - Electric Service Manual Download

Page: 46 / 275

1-12

ES,

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

Buy tires in bulk and save! 20’ & 40’ containers available.

We are the

Go Kart

Tire Store

Salem

Atlanta

Days

to most U.S. cites

Tire/T

ube Combo’

s in

FPX is “The Tire Store” for

concession go kart tires. We carry

only the best and most popular

sizes.

We stock so many tires we have

another warehouse on the east

coast! That’s right, we have a

warehouse in Atlanta, Georgia

and one at our headquarters in

Salem, Oregon!

We ship tire/tube combos from

both coasts!

We know how important it is

to keep your go karts on the

track, so we opened an east

coast warehouse in Atlanta to

supplement our west coast

warehouse in Salem, Oregon.

The Atlanta warehouse ships tire/

tube combination deals only. We

do not carry a full line of parts or

other tires at this warehouse.

From these two shipping locations,

we can ground ship tire/tube

combination deals to almost every

U.S. city within 3 days.

We also ship worldwide!

5” TIRE/TUBE COMBINATION DEALS

Part#

Description

Price

007880COMBO

Tire, 12 x 4.00 - 5” SL72 Bigfoot COMBO (W/Tube)

$22.99

007880

Tire, 12 x 4.00 - 5” SL72 Bigfoot (TIRE ONLY NO TUBE!)

$21.99

1-20-0037

Tire, 11 x 3.60 - 5” SL72 736HD

$22.99

Quantity discounts available on 007880COMBO. QTY 100+ $21.99, 500+ $20.99

4” TIRES

Part#

Description

Price

1-20-0054

Tire, 4.10/3.50 - 4” SL72 738HD

$15.80

TIRES - OTHER

Part#

Description

Price

1-60-0009

Tire, 10 x 4.50 - 5” SL72 739 Race Style Slick

$16.50

1-20-0064

Tire, 11 x 4.50 - 5” SL72 739 Race Style Slick

$18.99

1-60-0008

Tire, 11 x 7.10 - 5” SL72 739 Race Style Slick

$39.99

TIRES - FALCON

Part#

Description

Price

1-60-0185

Tire, 4.10/3.50-5 4-ply Falcon Electric King Nob Style

$18.99

1-20-0037

Tire, 11 x 3.60 - 5” SL72 736HD

$22.99

TUBES - GO KART TIRE

Part#

Description

Price

1-20-0038

Tube, 11 x 6.00 - 5 TR87

$4.99

1-20-0045

Tube, 11 x 7.10 - 5 CS

$9.50

00780-M

Tube, 3.40/3.00-5” (Bent Stem 45 degree Middle (BEST)(FPX)

$3.80

00778

Tube, 4.10/3.50-5” (Bent Stem)(FPX)

$3.83

00782

Tube, 4.10/3.50-6” (Bent Stem)

$6.35

1-20-0027

Tube, 15 x 6.00 - 6 (Used for 15 x 6.00 - 6 Tire)

$4.99

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands