J&J Amusements Double Eagle - Electric Service Manual Download | Manualshive

Page: 183 / 275

background image

10-7

THROTTLE

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899

www.jjamusements.com

THROTTLE CABLE/SPEED ADJUSTMENT

Remove the air cleaner from the kart to gain access

to the upper throttle control on top of the engine.

Loosen the throttle cable lock nuts. Adjust the

throttle cable so that there is a small amount of

free-play where the cable connects to the pedal. At

this time, the lock nuts for the throttle cable adjust-

ment should remain loose. The cable adjustment at

the engine should be backed almost all the way out.

NOTE:

A pedal stop plate is installed to limit pedal

travel; overall travel should not stretch the springs

more than 1/4”. Over-extension can break the

springs and cause premature failure.

Start the engine and allow it to warm up. Adjust

engine idle per the Honda service manual (1400rpm

+/-150rpm).

A J&J Tiny Tach PN 01073 makes RPM adjustment

easy; just wrap the tiny tach wire around the spark

plug wire. The wire picks up the signal through the

spark wire to activate the Tiny Tach when the en-

gine is started and displays the engine rpms.

Pedal stop

This small engine combination
tachometer and hour meter works
on go karts with 4 cycle gasoline
engines and is a must for all power
equipment to keep track of sched-
uled maintenance, oil changes, etc..
It’s the perfect service reminder for
preventative maintenance.

#01073

ENGINE ACCESSORIES

Part#

Description

Price

01073

Meter, Tiny Tach (Hour & RPM)

$49.00

010732

Meter, Analog Hour Only J&J Logo

$27.99

010692

Bracket, Stop Switch & Meter Mount

$11.22

#010732

«
...
181
182
183
184
185
...
»

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Reviews:

No comments

Related manuals for Double Eagle - Electric

Brand: Baja motorsports Pages: 50

Brand: Eagle Pages: 170

Jacobsen Groom Master II 88009

Brand: Textron Pages: 116

CU-48 OFF-ROAD SERIES

Brand: Crown Pages: 8

Brand: Dynacraft Pages: 31

GP800Y WaveRunner GP

Brand: Yamaha Pages: 119

FxNytro FX10M53SZ

Brand: Yamaha Pages: 92

FX Nytro FX10MTRY

Brand: Yamaha Pages: 92

Brand: Yamaha Pages: 146

Brand: Yamaha Pages: 182

Brand: Yamaha Pages: 140

Brand: Arctic Cat Pages: 84

Brand: Tomberlin Pages: 32

Brand: KTM Pages: 197

Sportsman 800 EFI 4x4 2012

Brand: Polaris Pages: 485

Brand: Turbosol Pages: 84

Brand: CHICAGO Pages: 25

1988 Citation LS

Brand: BOMBARDIER Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands