J&J Amusements Double Eagle - Electric Service Manual Download

Page: 154 / 275

8-12

ENGINE

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

ELECTRIC START ENGINE

OVERVIEW

The electric start option allows the operator to start the engine with the electric starter motor rather than the pull-cord

recoil assembly. By turning the switch located on the switch box and depressing the push-button starter, the engine will

turn over using the built-in starter motor. The attached recoil can also be used to start the engine if the starter system has

a problem.

There are two versions of the electric start system; the most common includes an on-board battery (to start the engine), a

lighting coil (to recharge the battery) and a voltage regulator with a built-in circuit protector.

The other system requires the use of a battery jump-box that is plugged into the kart to power the starter. The battery

jump-box is plugged into the karts using an Anderson-style connector (blue SB120) to provide power to the starter motor.

Both systems require an external electric start switch box with an on/o

ﬀ

switch and a push-button-starter.

The Honda shop manual includes service information, along with instructions for replacement and testing of the lighting

coil, starter relay and starter motor. This section will focus on the components added by J&J to facilitate the function of the

stock Honda equipment.

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands