J&J Amusements Double Eagle - Electric Service Manual Download

Page: 48 / 275

2-2

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

INSPECTION

Inspect the bumper rail daily for cracks, missing hardware, sagging or ripped D-rubber. Replace components as needed.

Do not weld or modify the rail.

B UMPERS & D-RUBBER

OVERVIEW

Frequent questions .................................................................page 2-2

Bumper removal ......................................................................page 2-3

D-rubber installation ...............................................................page 2-3

Nerf bar removal/replacement ..............................................page 2-5

FAQ’s

Q: CAN THE BUMPER BE REPAIRED OR WELDED?

A: No. The bumper is made of a special spring steel. It can not be welded or modi

ed. J&J o

ﬀ

ers a limited lifetime warranty

on its steel bumpers; attempting to modify the bumpers will void the warranty.

NOTE:

Abrasive wear can result in “thinning” the bumper. Breakage after such wear is not covered under warranty.

THE MOST DURABLE, LONGEST-LASTING BUMPER SUPPORT
AVAILABLE; THAT FIT MOST TYPES OF GO KARTS.

Special formulation gives these rubber bumper strips extra
long life and resistance to
cracking. Can easily be cut to
any length to suit your needs.



Thousands of uses.



Rubber sections can be cut to

any size.



Pre-cut and drilled, more natural

rubber compound to resist
breaking.



The unique “A” design with

rounded edges helps prevent
cracking and splitting.



The “A” shape ensures rubber-to-

bumper contact.

“A” RUBBER

Part#

Description

Price

1-70-0043

Rubber, “A” 4” x 4” x 1-5/8” (Cut/Drilled)(Formula K)

$5.50

00833

Rubber, “A” 4” x 4” x 3” (Cut/Drilled)

$8.99

00834

Rubber, “A” 4” x 4” x 4” (Cut/Drilled)

$11.30

008331

Rubber, “A” 4” x 4” x 60” (Log)

$2.99

008332

Rubber, “A” 6” x 6” x 60” (Log) (Used mostly on track rails)

$150.00

008555

Rubber, “D” 3” x 3” x 60” (Log)

$1.28

008556

Rubber, 2”x2” (Sold by inch, Max 60”)

$1.25

008577

Rubber, “U” Channel (Stocked 60” Log)

$60.48

0083310

Rubber, “A” 4” x 4” x 3-1/2” (Cut/NOT Drilled)

$11.99

A00831

Rubber, “A” 4” x 4” x 2-1/2” (Cut/NOT Drilled)

$7.47

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands