CIRCLIP, RETAINING RING
Replace any removed circlips and retaining rings with new ones, as removal weakens and deforms them. When installing
circlips and retaining rings, take care to compress or expand them only enough to install them and no more.
COTTER PIN
Replace any cotter pins that were removed with new ones, since removal deforms and breaks them.
REPLACEMENT PARTS
When there is a replacement instruction, replace these parts with new ones every time they are removed. Removed parts
will be damaged and/or lose their original function.
INSPECTION
When parts have been disassembled, visually inspect these parts for the following conditions or other damage (If there is
any doubt as to their condition, replace them with new parts):
Abrasions, cracks, hardening, warping, bends, dents, scratches, wear, color changes, deterioration, seizure.
SPECIFICATIONS
Speci
fi
cation terms are de
fi
ned as follows:
“Standards”
: Show dimensions or performances which brand-new parts or systems have.
“Service Limits”
: Indicate the usable limits. If measurement shows excessive wear or deteriorated performance, replace
the damaged parts.
