J&J Amusements Double Eagle - Electric Service Manual Download

Page: 112 / 275

6-26

AXLES

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

TWO WHEEL DRIVE (LIVE) AXLE

OVERVIEW

This system uses a continuous 1-1/4” axle (no step) with solid drive hubs on both ends. Because both wheels drive, more

power is transferred to the ground and spin-outs are reduced. However, this system by design forces the go-kart in a

straight line, so steering e

ﬀ

ort is increased. Note that castor settings for the front spindles are di

ﬀ

erent from and speci

to the axle con

guration.

FAQ’S

Q: THE GO-KARTS ARE VERY HARD TO STEER; CAN THE CASTOR BE CHANGED TO REDUCE THE STEERING
EFFORT?

A: Yes, the go-kart should be tuned to each speci

c track. Move the spindles toward “

at-neutral steer” one notch and

drive the go-kart. If the go-kart performs well (does not push or slide the front wheels through the turn), then proceed to

next notch until “push” becomes a problem. Any movement toward “

at” will reduce the steering e

ﬀ

ort.

ENGINE, COVERS, AND OTHER PARTS REMOVED FOR CLARITY

Summary of Contents for Double Eagle - Electric




















































































































































































































































































Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands

J&J Amusements Double Eagle - Electric, Service Manual

Search results

Summary of Contents for Double Eagle - Electric

Reviews:

Related manuals for Double Eagle - Electric

Brands by name

Popular brands