Instramed DUALMAX User Manual Download Page 58

Page: 58 / 219

User manual |

Alarms and limits

Pacemaker

Alarm

Priority

Color

Possible cause

Connect

adhesive pads.

MEDIUM PRIORITY

YELLOW

Adhesive paddles are disconnected.

Informative message

PM: Pause -

The outbreak of pacemaker pulses is paused.

PM: On -

The outbreak of pacemaker pulses is on.

Mode: Asynch -

The pacemaker is in asynchronous mode.

Mode: Dem -

The pacemaker is in demand mode.

Printer

Informative message

Without paper -

Printer is out of paper.

Printing -

Printer is printing.

ATTENTION
There is a risk possibility if the alarm limits do not follow a pattern in

the equipment or area, it means, if it is changed for each patient, or it is

different for more than one equipment.
Confirm that the alarm limits are appropriate for the patient each time

there is a new case of patient.

Summary of Contents for DUALMAX




























































































































































































































Search results

Summary of Contents for DUALMAX

Reviews:

Related manuals for DUALMAX

Brands by name

Popular brands

Instramed DUALMAX, User Manual

Search results

Summary of Contents for DUALMAX

Reviews:

Related manuals for DUALMAX

Brands by name

Popular brands