Instramed DUALMAX, User Manual

Page: 55 / 219

User manual | Alarms and limits
55
SpO
2
- Disconnected
sensor.
MEDIUM PRIORITY Yellow Sensor or SpO
2
extension disconnected or
incorrectly placed.
SpO
2
- Artifact. MEDIUM PRIORITY Yellow Muscle tremor detected.
Weak signal. MEDIUM PRIORITY Yellow DualMax cannot identify the signal. Weak signal,
possibly patient with low perfusion.
Loss of pulse. HIGH PRIORITY RED Patient without heartbeats for more than 4
seconds.
(↑) SPO
2
- Sat
above the limit.
HIGH PRIORITY RED Saturation is above the value defined on the
alarm configuration.
(↓) SPO
2
- Sat
below the limit.
HIGH PRIORITY RED Saturation is below the value defined on the
alarm configuration.
(↑) SPO
2
- BPM
above the limit.
HIGH PRIORITY RED Pulse value is above the value defined in the
alarm configuration.
(↓) SPO
2
- BPM
below the limit.
HIGH PRIORITY RED Pulse value is below the value defined in the
alarm configuration.
NIBP
Alarm Priority Color Possible cause
Excessive
pressure.
MEDIUM PRIORITY YELLOW The cuff´s maximum pressure has been
exceeded.
Cuff problems. MEDIUM PRIORTY YELLOW The cuff is misplaced or there is leakage on
measure circuit.
Weak signal . MEDIUM PRIORITY YELLOW Pulse too weak for NIBP measurements. Check
the cuff´s position and tightening.
Excessive
movement.
MEDIUM PRIORITY YELLOW There is noise due to the patient’s movement.
Long
measurement.
MEDIUM PRIORITY YELLOW The measurement of pressure is too long with
possibility of inaccurateness.
(↑) NIBP - Sys
above the limit.
HIGH PRIORITY RED Systolic pressure value is above the value set in
the alarm setting.
(↓) NIBP - Sys
below the limit.
HIGH PRIORITY RED Systolic pressure value is below the value set in
the alarm setting.
(↑) NIBP - Dia
above the limit.
HIGH PRIORITY RED Diastolic pressure value is above the value set
in the alarm setting.
(↓) NIBP - Dia
below the limit.
HIGH PRIORITY RED Diastolic pressure value is below the value set in
the alarm setting.