User manual |
Care and maintenance
186
• Keep the cable plugs dry, since a wet plug may cause some kind of failure.
For the SPO
2
sensor and cable:
• The cleaning process is specified in the accompanying instructions.
For the NIBP armband:
• The cleaning process is specified in the accompanying instructions.
For the CPR MAESTRO:
• Moisten a cloth with clean water and neutral detergent and clean the device until
all dirty is removed.
• Use a second dry cloth to remove excess of liquid and/or foam.
• Moisten a third cloth with Alcohol 70º and pass lightly on the product.
For the DEFIBRILLATION PADDLES set:
• Dampen a cloth with clean water and mild detergent and wipe any accessories
until all dirt is removed.
• Use a second dry cloth to remove excess liquid and/or foam.
• Moisten a third cloth with 70º alcohol and lightly wipe the product.
IMPORTANT RECOMMENDATIONS
• Never immerse in liquid and never spill liquid of any kind on any part of the
equipment.
• Do not use any other cleaning products not recommended by this manual.
NEVER sterilize any parts of the equipment, regardless of the sterilization
method, as this would damage the mechanical structure and compromise
the product's operation.
The recommendations above will ensure that the device will withstand,
without damage or deterioration of safety factors, the necessary cleaning
process.
