User manual |
Invasive pressure monitoring
141
6 - Channel 2 On/Off
Turns the channel 2 invasive pressure on or off.
7 - Channel 1 scale
Changes the scale of the channel 1 invasive pressure.
8 - Channel 1 clear transducer
Clears the channel 1 invasive pressure transducer.
OBS: this operation must be performed in every new procedure. First
position the transducer and then select “Start”.
9 - Channel 1 reset status
Displays the date of the last reset or the current reset step of the channel 1
transducer.
10 - Next page
Displays the next screen of the IP menu.
11 - Back/Exit
“BACK” to the configuration menu or “EXIT” to monitoring screen.
WARNING
a. Harmful injury to the patient may be caused by the continuous
pressure of the ARMBAND and resulting from twists in the connecting
tubing.
b. Very frequent measurements of blood pressure can cause injury to the
patient, because of interference with blood flow.
c. Injury to the patient can be caused if the ARMBAND is positioned on
top of a WOUND.
d. Injury to the patient and temporary interference in blood flow may be
caused in the event of pressurization of the ARMBAND where there is an
intravascular access or arteriovenous connection.
