ifm
Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15
2012-02-29
Function
The fieldbus modules
83
5.3.18
Module 16 – analogue input master 2
10676
Data content
10677
Analogue input data of the analogue slaves to AS-i master 2
With module 16 the data of the analogue input slaves on AS-i master 2 with the following AS-i slave
addresses can be directly read:
1...31 (setting = 4 channels per slave),
1...31 (setting = 1 channel per slave).
Change of the setting:
chapter
Setting "Number of channels per analogue slave"
(
→
page
)
Shall an analogue input channel outside the above-mentioned ranges be read?
►
Use the following module to read this data:
Module 9 – analogue multiplexed input
(
→
)
Direction of data
10590
C
F
Data from the controller to the fieldbus interface
Module settings
10678
Value range = 0…31 (4 words of data)
0
module is deactivated
1...31
module is activated (details
data interpretation)
Data interpretation, examples
10679
Module 14 – analogue input master 1
(
→
page
)
