IFM Ecomat 300 AC1318, Supplementary Device Manual

Page: 89 / 243

ifm Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15 2012-02-29
Function The fieldbus modules
89
Data interpretation
10705
The host command channel gives the user the opportunity to read different data from the controller or
to access defined functions of the controller.
The following table provides an overview of the available commands.
Commands in the host command channel
10706
D examples

chapter The host command channel ( → page 126 )
Command no. Description
0 execute no command
1 write parameters to a connected AS-i slave
3 adopt and save currently connected AS-i slaves in the configuration
4 change the list of projected AS-i slaves (LPS)
5 set the operating mode of the AS-i master
6 readdress a connected AS-i slave
7 set the auto addressing mode of the AS-i master
9 change the extended ID code 1 in the connected AS-i slave
10…20 adopt and save currently connected AS-i slaves in the configuration
28 deactivate the slave reset when changing to the protected mode
31 one-time execution of the "Extended safety monitor protocol" in the "Safety at work" monitor
21 read ID string of an AS-i slave with profile S-7.4
33 read diagnosis string of an AS-i slave with profile S-7.4
34 read parameter string of an AS-i slave with profile S-7.4
35 write parameter string of an AS-i slave with profile S-7.4
50 read current configuration AS-i slaves 0(A)...15(A)
51 read current configuration AS-i slaves 16(A)...31(A)
52 read current configuration AS-i slaves 0...15B
53 read current configuration AS-i slaves 16B...31B
54 read current parameters of a connected AS-i slave
55 read current AS-i slave lists
56 read projected configuration AS-i slaves 1(A)...15(A)
57 read projected configuration AS-i slaves 16(A)..31(A)
58 read projected configuration AS-i slaves 1B...15B
59 read projected configuration AS-i slaves 16B...31B
96 save data non-volatilely in the flash memory of the unit
97 carry out various settings in the device
102 retrieve the status of the device display
105 read the device properties