![background image](http://html1.mh-extra.com/html/ifm/ecomat-300-ac1318/ecomat-300-ac1318_supplementary-device-manual_3919725084.webp)
ifm
Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15
2012-02-29
Function
The fieldbus modules
84
5.3.19
Module 17 – analogue output master 2
10681
Data content
10682
Analogue output data of the analogue slaves to AS-i master 2
With module 17 the data of the analogue output slaves on AS-i master 2 with the following AS-i slave
addresses can be directly read:
1...31 (setting = 4 channels per slave),
1...31 (setting = 1 channel per slave).
Change of the setting:
chapter
Setting "Number of channels per analogue slave"
(
→
page
)
Shall an analogue output channel outside the above-mentioned ranges be written?
►
Use the following module to write this data:
Module 10 – analogue multiplexed output
(
→
)
Direction of data
10595
C
F
Data from the fieldbus interface to the controllerE
Module settings
10683
Value range = 0…17 (4 words of data)
0
module is deactivated
1...17
module is activated (details
data interpretation)
Data interpretation, examples
10684
Module 15 – analogue output master 1
(
→
page
)