ifm
Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15
2012-02-29
Function
The fieldbus modules
76
5.3.17
Module 15 – analogue output master 1
10667
Data content
10668
Analogue output data of the analogue slaves to AS-i master 1
With module 15 the data of the analogue output slaves on AS-i master 1 with the following AS-i slave
addresses can be directly written:
1...31 (setting = 4 channels per slave),
1...31 (setting = 1 channel per slave)
Change of the setting:
chapter
Setting "Number of channels per analogue slave"
(
→
page
)
Shall an analogue output channel outside the above-mentioned ranges be written?
►
Use the following module to write this data:
Module 10 – analogue multiplexed output
(
→
)
Direction of data
10595
C
F
Data from the fieldbus interface to the controllerE
Module settings
10669
Value range = 0...17
- 4 words of data for 4 channels per slave
- 2 words of data for 1 channel per slave
0
module is deactivated
1...17
module is activated (details
data interpretation)
