![background image](http://html1.mh-extra.com/html/ifm/ecomat-300-ac1318/ecomat-300-ac1318_supplementary-device-manual_3919725030.webp)
ifm
Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15
2012-02-29
Getting started
Connect Allen Bradley ControlLogix controller via DeviceNet
30
4.4.9
Step 9 – add a new module in the directory "I/O
Configuration"
10525
►
Click with the right mouse button on the
device in the directory [
I/O
Configuration
] (
screenshot).
►
Select [New Module...] in the displayed
context menu
> The "Select Module" dialogue is
displayed (
screenshot).
►
Select the module type used from the
category " Communications"
here: module "1756-DNB"
►
Confirm with [OK].
> The [New Module] dialogue is displayed
(
screenshot).
►
Enter the following data:
Term
Explanation
Name
Name for the module, here: "DN_Scanner"
Description
Optional description
Slot
Position of the DeviceNet scanner in the
rack
Revision
Version of the DeviceNet scanner
Electronic Keying
If the entered version is to be compared with
the actual version of the module:
Set [Compatible Keying] or [Exact Match].
When [Disable Keying] is set, no comparison
is made.
Input Size
Size of the input area seen from AB PLC in
double words.
Preset = 124 (maximum value)
Example: 16 bytes of input data are to be
transferred, it would thus be sufficient to set
4 double words.
Output Size
Size of the output area seen from AB PLC in
double words.
Preset = 123 (maximum value)
Example: 16 bytes of output data are to be
transferred, it would thus be sufficient to set
4 double words.
►
Finish making entries with [OK].